ROUSH DRIVE LINE

I AM BUYING A ROUCH 1 PEICE,ANYBODY USED ONE.

Roush doesnt make a 1 piece. Its probably something else with Roush's name stamped on it. Look it over and find the brand name on it other than Roush...that will lead you to what it is.

Can you post a pic or the specs of it?

NEEDFORSPEED wrote:I AM BUYING A ROUCH 1 PEICE,ANYBODY USED ONE.

What does that even mean?

I think when he says "ROUCH" he means "ROUSH" and when he says "DRIVE LINE" He means "DRIVE SHAFT"

That was my interpretation of it anyways haha.... Chris can you clear this up?

We are looking at making our own 1 piece dr.shaft.Cutting the ends off our 2 piece and putting in a 1 piece tube.

Good luck with that...I dont think you will get the weight savings your looking for if you use the Stock 2 piece...also getting it to balance will be very difficult...but good luck and let us know how it turns out

ALL I CAN SAY IS IT WAS SHIPPED IN FROM ROUSH FOR ANOTHER CAR AND THEY DID NOT USE IT. HE IS BRINGING IT TO WORK FRIDAY AND I WILL LET YOU KNOW.HOPE TO HAVE IT IN BY THE WEEKEND. I AM GOING TO PAINT IT GRABBER ORANGE AND PUT A ROUSH BADGE ON IT. BY THE WAY, DID A LITTLE DIGGING AUTO AND MANUAL TAKE THE SAME DRIVE LINE.

]


HIGH PERFORMANCE DRIVESHAFTS






[



Retail:
$1148.47

Our Low Price:
$805.99

You Save:
$342.48

Grabber07' wrote:Roush doesnt make a 1 piece. Its probably something else with Roush's name stamped on it. Look it over and find the brand name on it other than Roush...that will lead you to what it is.

Can you post a pic or the specs of it?

OK JARROD HIT US WITH SOME MORE GREAT QUOTES

Its not a Roush...Roush has their name on it...but when you spin it around and look for the actual manufacturer its made by another company. Went through this on FNSWEET..... here is the link to the thread

http://www.fnsweet.com/forums/showthread.php?t=41843&highlight=driveshaft

The Driveshaft is actually made by Dynotec NOT Roush....and you can quote me on that Chris Here are a few pics from that thread





Heres a Quote from that Thread

Originally Posted by grabbero07' Roush makes a one-piece driveshaft? Or do they source it and put their name on it? Great mods by the way! Everything looks great! EDIT: Just saw the Dynotech sticker..so its a Dynotech driveshaft that Roush sells... you confused me for a second hehe

"Thanks for pointing it out. It is a Dynotech I never would have noticed. I did buy it from Roush so I guess they are the reseller. On a side note I did check out the drive on Dynotech site and I did not pay the full retail on the Roush site. That sure made me feel better. " (posted by rrobby1)



SO NANNY NANNY BOO BOO IM RIGHT YOU ALL ARE WRONG BLAH BLAH BLAH KAAAKAAAKKAAA CHOOOOOO

Ok My 5 year old rant is over...you may go back to whatever you were doing

oh no, your wrong, i know you are but what am i, in your face

you should know all about things with roush on them but not being real roush!!!

Im rubber your glue anything you say bounces off of me and sticks to you!

osudoc21 wrote:oh no, your wrong, i know you are but what am i, in your face

you should know all about things with roush on them but not being real roush!!!

Ouch! Owned and Boned!

damn it i thought i was rubber!!

NOW!

This is turning out to be a funny thread!

SO DOES THE DYNOTECH FIT YOUR PROFILE JARROD

Well its a little small for my profile....mines about 9inches wide and 6ft long

how many companies actually manufacture their own products? i bet not many, steeda has a company do their UDP's even though they say steeda on them, if they dont build their products in house then that is not much different than having dynotech build them then roush putting their name on it. if roush backs it up then it is a roush.

ewwwww

YA WHAT HE SAID

I ORDERD DECLA ROTORS BY BAER TO. ARE THEY MADE BY WAGNER?

J-rod (Jarrod), explain to me the weak-sauce Roush-charger. If out-sourcing some production is bad, explain the Eaton-based Roush-charger (in-house).

I'll gladly admit that some Roush stuff is awesome (I wear the wing myself). But I think some of the other stuff is silly.

2006KBGT wrote:J-rod (Jarrod), explain to me the weak-sauce Roush-charger. If out-sourcing some production is bad, explain the Eaton-based Roush-charger (in-house).

I'll gladly admit that some Roush stuff is awesome (I wear the wing myself). But I think some of the other stuff is silly.

I think you have read tooo far into what I said....I never said Out-Sourcing is bad. I just said that he baught a dynotech driveshaft not a Roush.... The reason I bring it up is simple...COST. Roush thinks their shit dont stink...they take perfectly good parts made by someone else that you can buy anywhere else with a different name and...slap their name on it and mark it up 300%. Dont get me wrong some of the Roush only products are pretty darn good....they make their body kits in house, they designed their own wheels. If they designed it at least..and then had someone make it...thats different....But when you take something you had NO input in the design of...slap your name on it and mark it up and sell it as actual roush...thats where I see the obsurdity of it.

Roush has springs they designed...great
Roush has a body kit they designed...great
Roush has wheels they designed...great

Exhaust Roush.....NOT its borla..borla designed it and sells it as the "stinger" exhaust system and Roush stamped their name on it and marked it up $200

Same thing with the driveshaft. Great drive shaft...and im glad Chris got a great deal on it...thats the only way I would purchase anything from roush.

As for the "Eaton" Roush supercharger...... that supercharger is not sold as anything else but Roush. Now if it were an Eaton I could pick up with the entire kit for less at any performance shop and Roush just slapped their name on it and marked it up..then yea it would be the same thing as the driveshaft...

Ok another 5 year old rant is over.....maybe 4 year old I dont know.....does anyone have a cracker or a half eaten box of cornflakes? Im hungry.....

I GOT MY ROTORS,WHAT DO YOU THINK LEAVE THE CAIPIERS SILVER OR PAINT THEM RED?

Paint 'em red

Polish them... Everyone has red calipers.

paint the big part black and leave the holder silver

ROTORS ARE ON LEFT THE CALIPIERS STOCK FOR NOW. TONY AND I TOOK A LOOK I LIKE THE BLACK IDEA.JUST DONT NOW ABOUT THE RED.I KNOW I AM NOT PAINTING THEM GRABBER ORANGE OR VISTA BLUE

Paint them Pink for breast cancer!!