PJ Pre-Delivery Dyno Results
+4
Leonard 95
Dein
usafimj
pacettr
8 posters
Page 1 of 3
Page 1 of 3 • 1, 2, 3
PJ Pre-Delivery Dyno Results
Saleen had all PJ's dynoed prior to shipping. Mine was run twice...
pacettr- BMMC Enthusiast
- Number of posts : 86
Age : 47
Location : Yukon/Mustang
Car Type : PJ Saleen
First Name : Barrett
Registration date : 2009-04-09
Re: PJ Pre-Delivery Dyno Results
Those are some good numbers
usafimj- BMMC Enthusiast
- Number of posts : 41
Age : 38
Location : OKC
Car Type : '07 Mustang GT
First Name : Israel
Registration date : 2009-04-07
Re: PJ Pre-Delivery Dyno Results
I have heard this is about what a 427R makes...
pacettr- BMMC Enthusiast
- Number of posts : 86
Age : 47
Location : Yukon/Mustang
Car Type : PJ Saleen
First Name : Barrett
Registration date : 2009-04-09
Re: PJ Pre-Delivery Dyno Results
What are you making now
usafimj- BMMC Enthusiast
- Number of posts : 41
Age : 38
Location : OKC
Car Type : '07 Mustang GT
First Name : Israel
Registration date : 2009-04-07
Re: PJ Pre-Delivery Dyno Results
usafimj wrote:What are you making now
I don't know yet, but it should be in the low-mid 500's...
pacettr- BMMC Enthusiast
- Number of posts : 86
Age : 47
Location : Yukon/Mustang
Car Type : PJ Saleen
First Name : Barrett
Registration date : 2009-04-09
Re: PJ Pre-Delivery Dyno Results
.......If all goes well I should be able to get a blower in sept/oct
usafimj- BMMC Enthusiast
- Number of posts : 41
Age : 38
Location : OKC
Car Type : '07 Mustang GT
First Name : Israel
Registration date : 2009-04-07
Re: PJ Pre-Delivery Dyno Results
These are SAE #'s. The uncorrected are nice to look at...
pacettr- BMMC Enthusiast
- Number of posts : 86
Age : 47
Location : Yukon/Mustang
Car Type : PJ Saleen
First Name : Barrett
Registration date : 2009-04-09
Re: PJ Pre-Delivery Dyno Results
usafimj wrote: .......If all goes well I should be able to get a blower in sept/oct
pacettr- BMMC Enthusiast
- Number of posts : 86
Age : 47
Location : Yukon/Mustang
Car Type : PJ Saleen
First Name : Barrett
Registration date : 2009-04-09
Re: PJ Pre-Delivery Dyno Results
I like the uncorrected better also...lol I'm undecided on the Whipple H.O., KB, or Saleen
usafimj- BMMC Enthusiast
- Number of posts : 41
Age : 38
Location : OKC
Car Type : '07 Mustang GT
First Name : Israel
Registration date : 2009-04-07
Re: PJ Pre-Delivery Dyno Results
pacettr wrote:I have heard this is about what a 427R makes...
I wish I could give ya an answer on that.... you will hear alot of bs and trash talk on this topic (when it comes to the Roush). I never dynoed my car before I changed it... and once I modded and tuned it, I used a Dyno Dynamics Dyno... I might be going to the dyno thing tomorrow, if its a dynojet... I want to see my numbers....
This is with the Dyno Dynamics.... 406 hp 400 tq with Steeda CAI and 2.57 pulley
Dein- Gold Member
- Number of posts : 1582
Age : 41
Location : Tulsa, OK
Car Type : 2003 Cobra
First Name : Dein
Registration date : 2009-01-17
Re: PJ Pre-Delivery Dyno Results
Black08_427R wrote:pacettr wrote:I have heard this is about what a 427R makes...
I wish I could give ya an answer on that.... you will hear alot of bs and trash talk on this topic (when it comes to the Roush). I never dynoed my car before I changed it... and once I modded and tuned it, I used a Dyno Dynamics Dyno... I might be going to the dyno thing tomorrow, if its a dynojet... I want to see my numbers....
This is with the Dyno Dynamics.... 406 hp 400 tq with Steeda CAI and 2.57 pulley
Damn Dein, you took it easy on him. Actually Barrett, your giving the 427r too much credit, Deins probably wouldn't of broke 300rwhp!
Leonard 95- BMMC Elite Post Pig
- Number of posts : 2892
Age : 48
Location : Bixby
Car Type : 08 GT500
First Name : David
Registration date : 2008-12-09
Re: PJ Pre-Delivery Dyno Results
David is a below the belt hitter hehe
As for the numbers!! NICE!
As for the numbers!! NICE!
Guest- Guest
Re: PJ Pre-Delivery Dyno Results
Black08_427R wrote:pacettr wrote:I have heard this is about what a 427R makes...
I wish I could give ya an answer on that.... you will hear alot of bs and trash talk on this topic (when it comes to the Roush). I never dynoed my car before I changed it... and once I modded and tuned it, I used a Dyno Dynamics Dyno... I might be going to the dyno thing tomorrow, if its a dynojet... I want to see my numbers....
This is with the Dyno Dynamics.... 406 hp 400 tq with Steeda CAI and 2.57 pulley
Pretty sure the Hp and Trq should cross at 5250.
03supercobra- BMMC Enthusiast
- Number of posts : 66
Age : 105
Location : Edmond
Car Type : Mustang/Camaro
First Name : Clayton
Registration date : 2009-04-08
Re: PJ Pre-Delivery Dyno Results
Dyno sheets cross at 5252 when the left and right side HP and TQ tables are scaled identical.
For example HP is scaled from 100hp-500hp and TQ from 100-600 then where they cross would be lower.
On this dyno sheet however...both are scaled together. 100-500. HMMMM stumped
Horsepower is a function of torque. Nothing more to it.
HP=(tq*rpm)/5252
hp and tq are equal at 5252
For example HP is scaled from 100hp-500hp and TQ from 100-600 then where they cross would be lower.
On this dyno sheet however...both are scaled together. 100-500. HMMMM stumped
Horsepower is a function of torque. Nothing more to it.
HP=(tq*rpm)/5252
hp and tq are equal at 5252
Last edited by Grabber07' on 4/10/2009, 6:33 pm; edited 1 time in total
Guest- Guest
Re: PJ Pre-Delivery Dyno Results
Grabber07' wrote:Dyno sheets cross at 5250 when the left and right side HP and TQ tables are scaled identical.
For example HP is scaled from 100hp-500hp and TQ from 100-600 then where they cross would be lower.
On this dyno sheet however...both are scaled together. 100-500. HMMMM stumped
Horsepower is a function of torque. Nothing more to it.
HP=(tq*rpm)/5250
hp and tq are equal at 5250
Egg Head How do you know all this stuff when all you did is drink in college.
Guest- Guest
Re: PJ Pre-Delivery Dyno Results
There is one theory I have about the dynosheet. it may not be SAE corrected. From what Ive heard...If the graphs do not cross at 5252 and they are scaled correctly, then they are not real SAE standard measurements.
Dein...were your numbers SAE corrected? Dont cry..this might bring those numbers DOWN hehe
Dein...were your numbers SAE corrected? Dont cry..this might bring those numbers DOWN hehe
Last edited by Grabber07' on 4/10/2009, 6:33 pm; edited 1 time in total
Guest- Guest
Re: PJ Pre-Delivery Dyno Results
05SatinGT wrote:Grabber07' wrote:Dyno sheets cross at 5252 when the left and right side HP and TQ tables are scaled identical.
For example HP is scaled from 100hp-500hp and TQ from 100-600 then where they cross would be lower.
On this dyno sheet however...both are scaled together. 100-500. HMMMM stumped
Horsepower is a function of torque. Nothing more to it.
HP=(tq*rpm)/5252
hp and tq are equal at 5252
Egg Head How do you know all this stuff when all you did is drink in college.
Odouls
Guest- Guest
Re: PJ Pre-Delivery Dyno Results
I looked at mine, mine crossed at the same point on sae and unncorrected, right around 5400-5500rpms!
Leonard 95- BMMC Elite Post Pig
- Number of posts : 2892
Age : 48
Location : Bixby
Car Type : 08 GT500
First Name : David
Registration date : 2008-12-09
Re: PJ Pre-Delivery Dyno Results
Leonard 95 wrote:I looked at mine, mine crossed at the same point on sae and unncorrected, right around 5400-5500rpms!
Post yours if you can
Guest- Guest
Re: PJ Pre-Delivery Dyno Results
uncorrected:
corrected:
This is why I got a new tune, corrected was a tad low, I should be around 530rwhp range corrected. It feels alot stronger with new tune!
corrected:
This is why I got a new tune, corrected was a tad low, I should be around 530rwhp range corrected. It feels alot stronger with new tune!
Leonard 95- BMMC Elite Post Pig
- Number of posts : 2892
Age : 48
Location : Bixby
Car Type : 08 GT500
First Name : David
Registration date : 2008-12-09
Re: PJ Pre-Delivery Dyno Results
Looking at your graph it crosses at 5242 rpms...just as it should.
Some damn fine numbers David
Some damn fine numbers David
Guest- Guest
Re: PJ Pre-Delivery Dyno Results
Grabber07' wrote:There is one theory I have about the dynosheet. it may not be SAE corrected. From what Ive heard...If the graphs do not cross at 5252 and they are scaled correctly, then they are not real SAE standard measurements.
Dein...were your numbers SAE corrected? Dont cry..this might bring those numbers DOWN hehe
Nice observation! The HP is 100 - 500, TQ is 0 - 600
I can't wait to get on this fning dynojet... If you guys really think that my car won't produce over 400 hp with the mods I have... then you haven't been paying attention to any tunners at all.......... VMP... same setup 430 RWHP on DYNOJET....
Jarrod, my shit will always produce higher numbers than you! Don't cry
Dein- Gold Member
- Number of posts : 1582
Age : 41
Location : Tulsa, OK
Car Type : 2003 Cobra
First Name : Dein
Registration date : 2009-01-17
Re: PJ Pre-Delivery Dyno Results
Grabber07' wrote:Looking at your graph it crosses at 5242 rpms...just as it should.
Some damn fine numbers David
Yea, I was pretty happy but I know its got more in it! But in reality, it's not bad for a mail order 91 tune. I am sure Justin just sends a pretty safe tune at first till you hit the dyno up and check the air/fuel ratio. My a/f ratio was a tad rich, 11.2 range most of the way, I can tell the timing was turned up in the 2nd tune I used, it just feels alot stronger in the higher rpms!
Leonard 95- BMMC Elite Post Pig
- Number of posts : 2892
Age : 48
Location : Bixby
Car Type : 08 GT500
First Name : David
Registration date : 2008-12-09
Re: PJ Pre-Delivery Dyno Results
good numbers David I'm impressed! Must be fun driving that car around every day. Well at least when it's nice out
Guest- Guest
Re: PJ Pre-Delivery Dyno Results
03supercobra wrote:Black08_427R wrote:pacettr wrote:I have heard this is about what a 427R makes...
I wish I could give ya an answer on that.... you will hear alot of bs and trash talk on this topic (when it comes to the Roush). I never dynoed my car before I changed it... and once I modded and tuned it, I used a Dyno Dynamics Dyno... I might be going to the dyno thing tomorrow, if its a dynojet... I want to see my numbers....
This is with the Dyno Dynamics.... 406 hp 400 tq with Steeda CAI and 2.57 pulley
Pretty sure the Hp and Trq should cross at 5250.
They do! The hp scale is on the left and the tq scale is on the right. Look again! At 5250, he made about 380rwhp and 380rwtq. On my dyno chart from the same dyno, I thought the same thing initially. If both hp and tq were scaled the same the graph would cross on the 5250 mark.
Tims2002gt- BMMC Junkie
- Number of posts : 517
Age : 47
Location : Tulsa
Car Type : 2002 Mustang GT
First Name : Tim
Registration date : 2009-02-09
Re: PJ Pre-Delivery Dyno Results
Ahh gotcha, i haven't seen many people use dyno dynamics. Do they usually run lower or higher then a Dyno Jet?
03supercobra- BMMC Enthusiast
- Number of posts : 66
Age : 105
Location : Edmond
Car Type : Mustang/Camaro
First Name : Clayton
Registration date : 2009-04-08
Re: PJ Pre-Delivery Dyno Results
I asked breendspeed which dyno they wanted me to use to check there tune.They like the dyno jet,as long as they are well maintained.They think the tuner himself is also very important.
carcrazy53- BMMC Veteran Member
- Number of posts : 1655
Age : 71
Location : sapulpa
Car Type : 07 mustang gt,07 corvette convertable
First Name : Tony
Registration date : 2008-03-13
Page 1 of 3 • 1, 2, 3
Similar topics
» **Dyno Results**
» Dyno Results
» **2011 Mustang GT 5.0 DYNO RESULTS IN!**
» Enlyten!! 21st Century delivery system
» Been busy, results of racing at TRP
» Dyno Results
» **2011 Mustang GT 5.0 DYNO RESULTS IN!**
» Enlyten!! 21st Century delivery system
» Been busy, results of racing at TRP
Page 1 of 3
Permissions in this forum:
You cannot reply to topics in this forum
|
|
8/18/2015, 3:30 pm by coolhandluke
» Upholsetry work - black door panel
6/16/2015, 10:20 pm by mystang2007
» 347CI Dart Iron Eagle complete engine for sale, drop in and go fast!
6/25/2014, 6:07 pm by ruger311
» 7 Quarts AMSOIL Synthetic, AMSOIL Filter, Stock Brake Pads, Misc items
4/11/2014, 1:51 pm by Corepuncher
» shelbyfest?
4/9/2014, 2:37 am by Vandy9303
» tko 600 Swap 1965 mustang
4/2/2014, 12:18 pm by tulsadrags
» WTB five or six speed transmission
3/21/2014, 10:06 am by tulsadrags
» 03 cobra chrome wheels and new tires asking 600.00
3/17/2014, 9:14 am by tulsadrags
» spring cruise
12/21/2013, 10:06 pm by Captain Chaos
» BMMC GT/CS Registry
11/26/2013, 11:00 pm by gcmustanglx