possible issue with regrind cams

ok people i don't think any one here is running these but its a point that should be brought up. apparently theres been a hash of engine failures lately related to reground cams, i don't know exactly whats up. it could just be some misbuilt engines but i felt it was something that should be brought up.

http://www.teamshelby.com/forums/index.php?showtopic=50235&st=0

http://www.modularfords.com/forums/showthread.php?t=146745

these are just two examples i have on hand at the moment. comp cams from what i have read is looking into the issue. im not sure if theirs are regrinds or not but theyr investigating the shelby gt's failure as far as i know.

if your looking at doing cams i would spend the extra money on the billit and stay away from regrinds until this is resolved and the culprit discoverd.

if nothing else you will have a stouter valve train.

i'll try and keep this thread updated as time goes on. im also going to contact comp cams next week about the matter and i'll update you guys about this. just to restate this could turn out to be nothing. time will tell though

Which ones did u get?

i wsh i knew, im going to have to call comp to find out if theyr regrinds or not

havent heard of any issues...but I havent been on the interwebs a lot lately.

I would ask your question over at www.s197forums.com they are very knowledgable over there.

Should get an answer quickly

And they will be sure to make fun of you in quick fashion shortly there after. LOL

DBLDARE wrote:And they will be sure to make fun of you in quick fashion shortly there after. LOL

Yeah if your a loser. They dont make fun of me....Im the coolest.

Oh and really they dont make fun of me. You must smell

check with hector on the cams he knos all bout em.

91805stang wrote:check with hector on the cams he knos all bout em.

its all good if they are reginds then im just going to have to put in hardened lash adjusters and better rock arms