Re: Harmonic Vibration

by cjgt500 2/14/2012, 11:32 pm

Eww this just sounds nasty

by Shelby10' 2/14/2012, 11:38 pm

Ive seen that before. This is the V6 model and It raised some controversy in the mustang world over it. Lots of threads about it.

DS loop is looking more and more like a good idea hehe

by Shelby10' 2/14/2012, 11:41 pm

Any suggestion on brand?

by cjgt500 2/15/2012, 12:02 am

BMR..Van can hook you up. This is the one I have.

http://www.revanracing.com/products/bmr-rear-tunnel-brace-with-rear-driveshaft-safety-loop.html

by Shelby10' 2/15/2012, 12:09 am

Thanks Chad, were there any changes from the '10 to the '11 that would not allow this version to work? Everything I see says 07-10 on most performance parts for my car, then '11-'12.

by Shelby10' 2/15/2012, 12:10 am

Here is the one I found for mine

http://www.jegs.com/i/BMR%20Fabrications/142/DSL010H/10002/-1?CT=999

Harmonic Vibration - Page 2 142-DSL010H

by Shelby10' 2/15/2012, 12:20 am

After further review, it looks like the one I posted is the Front safety loop. The one you posted looks like it will work and is for the rear.

by cjgt500 2/15/2012, 12:54 am

'10-'12 mid tunnel are the same...and you don't have to remove the DS to install unlike the front DS loop

by Shelby10' 2/15/2012, 1:06 am

cjgt500 wrote:'10-'12 mid tunnel are the same...and you don't have to remove the DS to install unlike the front DS loop

And thank the lord for that, would not want to drop the shaft on this car.

by Tha Skinny 2/19/2012, 2:40 pm

Isn't a ds loop mandatory at TRP I'd running slicks?

by Shelby10' 2/19/2012, 5:43 pm

Tha Skinny wrote:Isn't a ds loop mandatory at TRP I'd running slicks?

Racing slicks yes. I dont believe the same rule applies to drag radials.

by Sponsored content

Sun	Mon	Tue	Wed	Thu	Fri	Sat
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31