Programming a Ford Keyless Entry Remote

1. With the doors unlocked and key in hand.
2. Cycle the ingnition 8 times. On off, on off, on off, on off, etc... Do this 8 times only and do it within 10 seconds ending in the ON position.
3. your door locks should cycle locked and unlocked.
4. Within 10 seconds press any key on the remote(s) you are wanting to program. (up to 4)
5. The door locks should cycle to confirm programming
6. When complete turn the key to Off and the door locks should cycle again letting you know you have exited programming mode.

1. have ALL fobs on hand, including those which might already be programmed correctly. The programming will "erase" your old ones.
2. Unlock the doors. Put the key in the ignition, and turn from "Off" to "ACC" 5 times in under 10 seconds. The doors will lock. Leave key in the ACC position
3. Program the fobs by pressing any key on the fob. Do this for each fob. The doors locks will lock/unlock
4. Turn the key to Off. Locks will lock/unlock, and you are out of programming mode.
5. Test all remotes.

05SatinGT wrote:Brent.. I did this on my Cobra when i first got it. Dont be a follower.