Super Shaker is On....
+2
BMMC1
v6v8swap
6 posters
Page 1 of 1
Super Shaker is On....
Hey everyone! Just now getting around to posting some pics of the mod I did in the first part of July. The wife and I bought a new house in August, so I've been busy moving and trying to get the old house sold.
I also got a tuner and tune from Brenspeed to put in it, but I've gotten no where with that. It's an SCT X3 and I can't get it to load the tune. I haven't really had time to mess with it too much, but the car isn't running right after installing the shaker with the tune that Saleen loaded to the ECM. I was hoping the Brenspeed tune would help, but can't get it to load at all. The tuner is not unlocking the ecm for some reason.
I was hoping to run at mods vs. rods again this year with it, but if I can't get it running right idk if it's even going to be worth it. I'm looking for someone that knows SCT stuff to help me figure out why it won't load. I called Brenspeed and they sent me to SCT. I talked to a tech at SCT and he gave me some things to try, but once I tried to email him with those results, I can't get a reply back out of them either. So, now I'm kinda stuck and don't know which way to go. Any ideas from anyone?
I also got a tuner and tune from Brenspeed to put in it, but I've gotten no where with that. It's an SCT X3 and I can't get it to load the tune. I haven't really had time to mess with it too much, but the car isn't running right after installing the shaker with the tune that Saleen loaded to the ECM. I was hoping the Brenspeed tune would help, but can't get it to load at all. The tuner is not unlocking the ecm for some reason.
I was hoping to run at mods vs. rods again this year with it, but if I can't get it running right idk if it's even going to be worth it. I'm looking for someone that knows SCT stuff to help me figure out why it won't load. I called Brenspeed and they sent me to SCT. I talked to a tech at SCT and he gave me some things to try, but once I tried to email him with those results, I can't get a reply back out of them either. So, now I'm kinda stuck and don't know which way to go. Any ideas from anyone?
v6v8swap- BMMC Enthusiast
- Number of posts : 46
Age : 57
Location : Enid, OK
Car Type : 2008 Mustang GT, 1994 Mustang GT, 1994 Mustang V6
First Name : Phil
Registration date : 2009-04-12
Re: Super Shaker is On....
Dunno... squeaky wheel... bug the shit out of them until the help. What did the SCT tech say to do.
Maybe Greg can chime in...
Maybe Greg can chime in...
BMMC1- BMMC Board Member
- Number of posts : 13771
Age : 57
Location : Tulsa
Car Type : 2011 Shelby GT500
First Name : Paul The DILF
Registration date : 2008-03-09
Re: Super Shaker is On....
maybe returning it back to stock tune and then try installing the new tune.
Papi- I'm Puerto rican Damn it!
- Number of posts : 2673
Age : 48
Location : Broken Arrow
Car Type : 2002 Ford Ranger Tremor & 2008 Jeep Grand Cherokee
First Name : Hector
Registration date : 2008-04-05
Re: Super Shaker is On....
hectors on to something there. that susaly works. if it dont then give greg a call. he's the man with a plan and knows how to work this stuff. if nothing else he can tune it for you.
ARMORINE- Paul's 2 Star Atta-Boy Award!
- Number of posts : 3701
Age : 35
Location : Tulsa, Oklahoma
Car Type : Shelby GT
First Name : Jared
Registration date : 2008-04-01
Re: Super Shaker is On....
I would have to see it. Did SCT have you update the filmware? I could come by and see what's going on. Do you get any errors when trying to load a tune. The saleen file maybe a different box code than what breenspeed gave you.
Guest- Guest
Re: Super Shaker is On....
Very cool! Can't wait to see it get all the bugs worked out.
07Shelby500- BMMC Board Member
- Number of posts : 9044
Age : 48
Location : Owasso Oklahoma
Car Type : The thing which must not be spoken of
First Name : David
Registration date : 2008-03-10
Re: Super Shaker is On....
Get that damned car fixed, Phil. I've really been looking forward to seeing it since you started this project.
Phoenix- BMMC Enthusiast
- Number of posts : 56
Age : 43
Location : Edmond
Car Type : 99 Cobra
First Name : Landon
Registration date : 2010-09-09
Re: Super Shaker is On....
It did give me some error codes, but I'm at work and don't have them with me.
SCT had me check for the 18v that the tuner puts out to unlock the ECM at the obd port and it was there. That's where I stopped with it. It pulls good up to about 3500 and then just kinda hesitates on up to redline. Itused to pull up to 6000 redline before the shaker install. And I'm seeing more boost than before too. Used to be about 7, now 8-9, so it should feel stronger.
SCT had me check for the 18v that the tuner puts out to unlock the ECM at the obd port and it was there. That's where I stopped with it. It pulls good up to about 3500 and then just kinda hesitates on up to redline. Itused to pull up to 6000 redline before the shaker install. And I'm seeing more boost than before too. Used to be about 7, now 8-9, so it should feel stronger.
v6v8swap- BMMC Enthusiast
- Number of posts : 46
Age : 57
Location : Enid, OK
Car Type : 2008 Mustang GT, 1994 Mustang GT, 1994 Mustang V6
First Name : Phil
Registration date : 2009-04-12
Re: Super Shaker is On....
KBCal wrote:I would have to see it. Did SCT have you update the filmware? I could come by and see what's going on. Do you get any errors when trying to load a tune. The saleen file maybe a different box code than what breenspeed gave you.
OK I'm home now. The codes came out like this:
Error 1019-Unlock ECM Failed
Error 1017-Upload Stock Failed
Error 1009-No Tune Changes Written
Yes I did update the firmware to the latest one that they had.
I'm in Enid, so I'd probably need to come to you. But, I'm totally willing to do this if you can figure this thing out. Let me know what you think or what I need to try........Thanks!
v6v8swap- BMMC Enthusiast
- Number of posts : 46
Age : 57
Location : Enid, OK
Car Type : 2008 Mustang GT, 1994 Mustang GT, 1994 Mustang V6
First Name : Phil
Registration date : 2009-04-12
Similar topics
» SALEEN TWIN SCREW WITH SHAKER!!!
» Shaker 1000 to Avic F90BT
» fs shaker 500 $50 two door speakers stock $10
» Looking for Mach 1 Shaker/Hood Set-up...
» 2010+ Shaker Hood On CL - $200
» Shaker 1000 to Avic F90BT
» fs shaker 500 $50 two door speakers stock $10
» Looking for Mach 1 Shaker/Hood Set-up...
» 2010+ Shaker Hood On CL - $200
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
8/18/2015, 3:30 pm by coolhandluke
» Upholsetry work - black door panel
6/16/2015, 10:20 pm by mystang2007
» 347CI Dart Iron Eagle complete engine for sale, drop in and go fast!
6/25/2014, 6:07 pm by ruger311
» 7 Quarts AMSOIL Synthetic, AMSOIL Filter, Stock Brake Pads, Misc items
4/11/2014, 1:51 pm by Corepuncher
» shelbyfest?
4/9/2014, 2:37 am by Vandy9303
» tko 600 Swap 1965 mustang
4/2/2014, 12:18 pm by tulsadrags
» WTB five or six speed transmission
3/21/2014, 10:06 am by tulsadrags
» 03 cobra chrome wheels and new tires asking 600.00
3/17/2014, 9:14 am by tulsadrags
» spring cruise
12/21/2013, 10:06 pm by Captain Chaos
» BMMC GT/CS Registry
11/26/2013, 11:00 pm by gcmustanglx