clutch, motor mounts, tranny mounts
4 posters
Page 1 of 1
clutch, motor mounts, tranny mounts
So I know I havent been on here in next to forever and I would say it has been because Im working a lot but that is no excuse lol. Anyways just thought I would fill in whoever cares the status of my car. I was driving it and the clutch started slipping real bad. We ended up dropping out my transmission and I had completely lost about a 1/4 of the friction surface on my 10k mile spec 3 clutch. After seeing that I took the clutch disc, flywheel, and pressure plate down to friction products and getting everything redone for $125, which isnt bad in my opinion. At the same time I noticed my motor mounts were completely shot and you could tip my engine with one finger, and my tranny mount was bad too. So with a quick call to Maximum Motorsports I ordered a set of solid motor mounts and a poly tranny mount! I also got a new clutch cable, quadrant, and firewall adjuster from Steeda. So hopefully it will all be back together once all the parts get here in a couple weeks. Im excited to see how much torque I had been losing with those crapped out motor/tranny mounts! Anyways thats all, I might take pics of the clutch job when I find time to pick it back up if you all are interested in seeing their work, other than that I think everyone has seen pics of a transmission out lol so I wont waste your time!
1bad00gt- BMMC Veteran Member
- Number of posts : 557
Age : 36
Location : Tulsa/Stillwater
Car Type : Mustang
First Name : Jeremy
Registration date : 2008-03-12
Re: clutch, motor mounts, tranny mounts
NO EXCUSES!! haha YOu need to be on here more Jeremy! Sucks about finding all that wrong with your car...but congrats on upgrading!!!
Hope your having a merry christmas! let us know how it turns out....oh and pics are mandatory
Hope your having a merry christmas! let us know how it turns out....oh and pics are mandatory
Guest- Guest
Re: clutch, motor mounts, tranny mounts
Merry Christmas to you too!! Is the Jerbear going to go out and ruin little childrens belief in santa claus tonight by going out and banging on ramdom windows?
Well in that case I will get some pics as soon as I can. Right now the tranny is just sitting up under the car, but Ill try to get some of the killer motor mounts!
Well in that case I will get some pics as soon as I can. Right now the tranny is just sitting up under the car, but Ill try to get some of the killer motor mounts!
1bad00gt- BMMC Veteran Member
- Number of posts : 557
Age : 36
Location : Tulsa/Stillwater
Car Type : Mustang
First Name : Jeremy
Registration date : 2008-03-12
Re: clutch, motor mounts, tranny mounts
Welcome back. Good to hear from you again. We still need to run the cars sometime, but have to wait for some warmer weather. The nittos dont seem to like the cold all that much.
Have a Merry Christmas. Will come by to see you guys here after christmas. I need a rotate and balance on the truck, and after last weeks ice storm, need a little alignment too.
Have a Merry Christmas. Will come by to see you guys here after christmas. I need a rotate and balance on the truck, and after last weeks ice storm, need a little alignment too.
03.sonicblue- BMMC Board Member
- Number of posts : 5734
Age : 42
Location : Broken Arrow
Car Type : 03 Mustang Cobra
First Name : Jerry
Registration date : 2008-07-26
Re: clutch, motor mounts, tranny mounts
03.sonicblue wrote:Welcome back. Good to hear from you again. We still need to run the cars sometime, but have to wait for some warmer weather. The nittos dont seem to like the cold all that much.
Have a Merry Christmas. Will come by to see you guys here after christmas. I need a rotate and balance on the truck, and after last weeks ice storm, need a little alignment too.
Why an alignment on the truck jerry?? Did you run into a curb haha.....
Guest- Guest
Re: clutch, motor mounts, tranny mounts
Nope, the curb jumped out in front of me.
Actually, I was going strait and the trucked lacked the ability to turn. So it was either continue the slide which I was not having any luck of getting out of, or straighten up the wheels and try and take out the curb. I choose option B. If i wouldn't have straightened up the wheels, probably would be looking at a new hub, wheel and other things. All in all it didn't seem that bad. There are pot holes around town that I've hit worse the that.
Actually, I was going strait and the trucked lacked the ability to turn. So it was either continue the slide which I was not having any luck of getting out of, or straighten up the wheels and try and take out the curb. I choose option B. If i wouldn't have straightened up the wheels, probably would be looking at a new hub, wheel and other things. All in all it didn't seem that bad. There are pot holes around town that I've hit worse the that.
03.sonicblue- BMMC Board Member
- Number of posts : 5734
Age : 42
Location : Broken Arrow
Car Type : 03 Mustang Cobra
First Name : Jerry
Registration date : 2008-07-26
Re: clutch, motor mounts, tranny mounts
Ya we will definitely have to run them! Ummm maybe we should wait untill I have my gears just to make it a little more fair for me haha. Ya bring the truck on in! Hopefully you didnt bend anything under there, that wouldnt be any fun! But you are right, the nittos arent big fans of cold weather, especially after they are almost bald.... :(
1bad00gt- BMMC Veteran Member
- Number of posts : 557
Age : 36
Location : Tulsa/Stillwater
Car Type : Mustang
First Name : Jeremy
Registration date : 2008-03-12
Re: clutch, motor mounts, tranny mounts
Hey Jeremy... I just notice this thread. Good to hear from ya again!
BMMC1- BMMC Board Member
- Number of posts : 13771
Age : 57
Location : Tulsa
Car Type : 2011 Shelby GT500
First Name : Paul The DILF
Registration date : 2008-03-09
Re: clutch, motor mounts, tranny mounts
well when the lady starts getting a little older things start to sag a bit. you just have to go in there and replace parts. get everything lifted back into place like she was a teenager again. how many miles on it causing everything to be gone.
Psycho Bob- BMMC Post Pig
- Number of posts : 1648
Age : 46
Location : Tulsa/FT. Carson, CO
Car Type : 07 GT
First Name : Bob
Registration date : 2008-10-09
Similar topics
» sn95 solid motor mounts for sale
» I think my clutch is out, I need info on a high performance clutch and a good shop
» 11 gt tranny out
» Tranny Problems
» WTB: 5r55s (automatic) tranny
» I think my clutch is out, I need info on a high performance clutch and a good shop
» 11 gt tranny out
» Tranny Problems
» WTB: 5r55s (automatic) tranny
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
8/18/2015, 3:30 pm by coolhandluke
» Upholsetry work - black door panel
6/16/2015, 10:20 pm by mystang2007
» 347CI Dart Iron Eagle complete engine for sale, drop in and go fast!
6/25/2014, 6:07 pm by ruger311
» 7 Quarts AMSOIL Synthetic, AMSOIL Filter, Stock Brake Pads, Misc items
4/11/2014, 1:51 pm by Corepuncher
» shelbyfest?
4/9/2014, 2:37 am by Vandy9303
» tko 600 Swap 1965 mustang
4/2/2014, 12:18 pm by tulsadrags
» WTB five or six speed transmission
3/21/2014, 10:06 am by tulsadrags
» 03 cobra chrome wheels and new tires asking 600.00
3/17/2014, 9:14 am by tulsadrags
» spring cruise
12/21/2013, 10:06 pm by Captain Chaos
» BMMC GT/CS Registry
11/26/2013, 11:00 pm by gcmustanglx