Need a little help
4 posters
Page 1 of 1
Need a little help
Those little plastic pins that are under along the rocker panels
how do you take those off w/o breaking them.
how do you take those off w/o breaking them.
MustangFanatic07- BMMC Elite Post Pig
- Number of posts : 2549
Age : 36
Location : Tulsa
Car Type : 2008 Manual Mustang GT
First Name : Amanda
Registration date : 2008-09-22
Re: Need a little help
You need either two flat screwdrivers and alot of finnesse.(sp?) or a special tool for removing interior panels looks like a snakes tongue sortov a 'V' shaped flat blade. I've always had them break and you just have to replace them. You can get more at Lowes in the special fasteners area. (small pullout drawer trays near the nuts and bolts)
07Shelby500- BMMC Board Member
- Number of posts : 9044
Age : 48
Location : Owasso Oklahoma
Car Type : The thing which must not be spoken of
First Name : David
Registration date : 2008-03-10
Re: Need a little help
ok thats what i was afraid of but oh well,
simplest tasks always have to be a pain
simplest tasks always have to be a pain
MustangFanatic07- BMMC Elite Post Pig
- Number of posts : 2549
Age : 36
Location : Tulsa
Car Type : 2008 Manual Mustang GT
First Name : Amanda
Registration date : 2008-09-22
Re: Need a little help
Yep. Not real fun. They might come out without breaking since your car is relatively new. All you can do is try.
07Shelby500- BMMC Board Member
- Number of posts : 9044
Age : 48
Location : Owasso Oklahoma
Car Type : The thing which must not be spoken of
First Name : David
Registration date : 2008-03-10
Re: Need a little help
Yeppers... Lowes... I've bought many. ;)
BMMC1- BMMC Board Member
- Number of posts : 13771
Age : 57
Location : Tulsa
Car Type : 2011 Shelby GT500
First Name : Paul The DILF
Registration date : 2008-03-09
Re: Need a little help
Can't seem to find that same exact plastic fastners,
is there a different one you guys used?
would it be alright to drive my car w/o those fasteners and just those white plastic peices holding it up.
hopefully someone answers that question today, gotta drive my car tomorrow
is there a different one you guys used?
would it be alright to drive my car w/o those fasteners and just those white plastic peices holding it up.
hopefully someone answers that question today, gotta drive my car tomorrow
MustangFanatic07- BMMC Elite Post Pig
- Number of posts : 2549
Age : 36
Location : Tulsa
Car Type : 2008 Manual Mustang GT
First Name : Amanda
Registration date : 2008-09-22
Re: Need a little help
why not just go to lowes today and drive your car tomorrow with no worries
Psycho Bob- BMMC Post Pig
- Number of posts : 1648
Age : 46
Location : Tulsa/FT. Carson, CO
Car Type : 07 GT
First Name : Bob
Registration date : 2008-10-09
Re: Need a little help
I'd kind of like to know what part to get, i cant seem to find the exact same plastic fastener at lowes,
Im curious on which others would work
Im curious on which others would work
MustangFanatic07- BMMC Elite Post Pig
- Number of posts : 2549
Age : 36
Location : Tulsa
Car Type : 2008 Manual Mustang GT
First Name : Amanda
Registration date : 2008-09-22
Re: Need a little help
What are they for??? To hold up the side skirt I assume? Need more details. Got pictures?!
BMMC1- BMMC Board Member
- Number of posts : 13771
Age : 57
Location : Tulsa
Car Type : 2011 Shelby GT500
First Name : Paul The DILF
Registration date : 2008-03-09
Re: Need a little help
yeah to hold up the side skirts, i'll post up a picture
couldnt get those fasteners out with/out cuttin them
couldnt get those fasteners out with/out cuttin them
MustangFanatic07- BMMC Elite Post Pig
- Number of posts : 2549
Age : 36
Location : Tulsa
Car Type : 2008 Manual Mustang GT
First Name : Amanda
Registration date : 2008-09-22
Re: Need a little help
in those rectangular cut outs is where there suppose to go
MustangFanatic07- BMMC Elite Post Pig
- Number of posts : 2549
Age : 36
Location : Tulsa
Car Type : 2008 Manual Mustang GT
First Name : Amanda
Registration date : 2008-09-22
Re: Need a little help
At Lowes they have some very similar. They may be a bit longer but all you have to do is snip off the end a bit and they will work fine. If you can't find them just space out the good ones that you have left from the originals and it should hold it in place until you can get the ones you are looking for. The ones I have found in Lowes are located in the hardware section in the special fasteners cases. Pull out drawers with various odd special fasteners.
07Shelby500- BMMC Board Member
- Number of posts : 9044
Age : 48
Location : Owasso Oklahoma
Car Type : The thing which must not be spoken of
First Name : David
Registration date : 2008-03-10
Re: Need a little help
you think it'll be good for just one day w/o those 16 fasteners
all thats holding it up is those 14 lil white peices, 2 big plastic screws things and 4 push in fasteners, i'll head over to lowes in owasso an check
all thats holding it up is those 14 lil white peices, 2 big plastic screws things and 4 push in fasteners, i'll head over to lowes in owasso an check
MustangFanatic07- BMMC Elite Post Pig
- Number of posts : 2549
Age : 36
Location : Tulsa
Car Type : 2008 Manual Mustang GT
First Name : Amanda
Registration date : 2008-09-22
Re: Need a little help
Let us know where you find them. Never know when your going brake those things.
Guest- Guest
Re: Need a little help
i'd rather drive to owasso with my side skirt sitting in the car than risk the chance of it falling off and driving over it and ruining it. just a word of advice. maybe a zip tie from walmart would be my last resort till you get there if you don't want to take it off. but i wouldn't use then instead of the other things. just until you get them.
oh and of course you can get them at ford parts department, but they'll rape you for pricing
oh and of course you can get them at ford parts department, but they'll rape you for pricing
Psycho Bob- BMMC Post Pig
- Number of posts : 1648
Age : 46
Location : Tulsa/FT. Carson, CO
Car Type : 07 GT
First Name : Bob
Registration date : 2008-10-09
Re: Need a little help
Yes just take it off for now until you find the right clips. You'll loose it.
If you can't find something that works at Lowes... You might also try an autopart store. Advanced, OReily's and AutoZone, normally have a section full of odds and end pieces like that. The brand name is called "Help!".
Also, Ace Hardware stores have a great selection of hard to find fasteners. While I havn't seen these there, I have browsed through their selection and they really have a good selection.
If you can't find something that works at Lowes... You might also try an autopart store. Advanced, OReily's and AutoZone, normally have a section full of odds and end pieces like that. The brand name is called "Help!".
Also, Ace Hardware stores have a great selection of hard to find fasteners. While I havn't seen these there, I have browsed through their selection and they really have a good selection.
BMMC1- BMMC Board Member
- Number of posts : 13771
Age : 57
Location : Tulsa
Car Type : 2011 Shelby GT500
First Name : Paul The DILF
Registration date : 2008-03-09
Re: Need a little help
Just take them off Jarrods car and put them on yours and then make him find them. Problem solved.
I think there the same for all years. If you really want to get in deep, you can go to the salvage and pull them off an older mustang. Im sure they are the same. I could be wrong.
I think there the same for all years. If you really want to get in deep, you can go to the salvage and pull them off an older mustang. Im sure they are the same. I could be wrong.
Guest- Guest
Re: Need a little help
probably have the same problem with them breaking. i'd rather just buck up and pay the denero from ford. they usually have them in stock and they really aren't that much. for as much as you've spent in gas driving around looking for them you could've just gone and gotten the actual ones they use.
Psycho Bob- BMMC Post Pig
- Number of posts : 1648
Age : 46
Location : Tulsa/FT. Carson, CO
Car Type : 07 GT
First Name : Bob
Registration date : 2008-10-09
Re: Need a little help
hehe i got lucky yesterday, decided to call in sick yesterday,
and drive to Joe cooper hoping the skirts wont fall off, they didnt btw
showed em what i needed, and showed me a pin that would cost 32 bucks for 16, I responded with Holy Cow!!! He said he could get me a discount ;)
well wasnt long enough anyways so he found me a pin that was a half inch longer and that worked perfect and i spent like 17 bucks for 16 peices :)
and drive to Joe cooper hoping the skirts wont fall off, they didnt btw
showed em what i needed, and showed me a pin that would cost 32 bucks for 16, I responded with Holy Cow!!! He said he could get me a discount ;)
well wasnt long enough anyways so he found me a pin that was a half inch longer and that worked perfect and i spent like 17 bucks for 16 peices :)
MustangFanatic07- BMMC Elite Post Pig
- Number of posts : 2549
Age : 36
Location : Tulsa
Car Type : 2008 Manual Mustang GT
First Name : Amanda
Registration date : 2008-09-22
Re: Need a little help
yep so all is well on the home front then. now everytime you go to a hardware store you better be looking for them. when you do find them they'll be more like a quarter a piece rather than a dollar. cha ching
Psycho Bob- BMMC Post Pig
- Number of posts : 1648
Age : 46
Location : Tulsa/FT. Carson, CO
Car Type : 07 GT
First Name : Bob
Registration date : 2008-10-09
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
8/18/2015, 3:30 pm by coolhandluke
» Upholsetry work - black door panel
6/16/2015, 10:20 pm by mystang2007
» 347CI Dart Iron Eagle complete engine for sale, drop in and go fast!
6/25/2014, 6:07 pm by ruger311
» 7 Quarts AMSOIL Synthetic, AMSOIL Filter, Stock Brake Pads, Misc items
4/11/2014, 1:51 pm by Corepuncher
» shelbyfest?
4/9/2014, 2:37 am by Vandy9303
» tko 600 Swap 1965 mustang
4/2/2014, 12:18 pm by tulsadrags
» WTB five or six speed transmission
3/21/2014, 10:06 am by tulsadrags
» 03 cobra chrome wheels and new tires asking 600.00
3/17/2014, 9:14 am by tulsadrags
» spring cruise
12/21/2013, 10:06 pm by Captain Chaos
» BMMC GT/CS Registry
11/26/2013, 11:00 pm by gcmustanglx