How much to create a flange on an exhaust to bolt to the mid-pipe?
2 posters
Page 1 of 1
How much to create a flange on an exhaust to bolt to the mid-pipe?
Well took my car to Leonard Saturday for my alignment and tire swap, and when he was pulling it off the rack the exhaust hangs really low on the driver side and it caught the rack and twisted a little. No change visually, just makes me realize how low my exhaust is on that side, and thinking about swapping mufflers and dumping it at the axle.
I found a set of Flows with dumps on Deadhorse, and the guy is local. Wants $40 for both, figure that's a good deal. But they were welded on, so although the pre-muffler piping is there, they would require welding, and I don't want to damage my current set-up by welding these in.
What shop would you recommend for creating the ball-flange on these so that I can just bolt them on and swap back and forth if I ever wanted to?
Hoping it can be done for around $20...
I found a set of Flows with dumps on Deadhorse, and the guy is local. Wants $40 for both, figure that's a good deal. But they were welded on, so although the pre-muffler piping is there, they would require welding, and I don't want to damage my current set-up by welding these in.
What shop would you recommend for creating the ball-flange on these so that I can just bolt them on and swap back and forth if I ever wanted to?
Hoping it can be done for around $20...
Re: How much to create a flange on an exhaust to bolt to the mid-pipe?
Leons muffler in Sapulpa, call and ask.
Shelby10'- BMMC Board Member
- Number of posts : 3610
Age : 42
Location : Broken Arrow
Car Type : 2010 Shelby GT500
First Name : Jarrod
Registration date : 2010-11-04
Re: How much to create a flange on an exhaust to bolt to the mid-pipe?
yea the guy I am getting them from said he has a buddy that works in a muffler shop, he's gonna see what it would cost and if reasonable just have it done and factor it in to the price.
Similar topics
» Broken Valve Cover Bolt - Replace bolt or whole cover?
» Exhaust Thread (for Exhaust talk and video clips)
» Edelbrock Head Bolt Bushings
» FEELER - 05 Silver GT - 60k Miles w/ Bolt-Ons
» 2011 GT500 simple bolt-on's to achieve over 600rwhp
» Exhaust Thread (for Exhaust talk and video clips)
» Edelbrock Head Bolt Bushings
» FEELER - 05 Silver GT - 60k Miles w/ Bolt-Ons
» 2011 GT500 simple bolt-on's to achieve over 600rwhp
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
8/18/2015, 3:30 pm by coolhandluke
» Upholsetry work - black door panel
6/16/2015, 10:20 pm by mystang2007
» 347CI Dart Iron Eagle complete engine for sale, drop in and go fast!
6/25/2014, 6:07 pm by ruger311
» 7 Quarts AMSOIL Synthetic, AMSOIL Filter, Stock Brake Pads, Misc items
4/11/2014, 1:51 pm by Corepuncher
» shelbyfest?
4/9/2014, 2:37 am by Vandy9303
» tko 600 Swap 1965 mustang
4/2/2014, 12:18 pm by tulsadrags
» WTB five or six speed transmission
3/21/2014, 10:06 am by tulsadrags
» 03 cobra chrome wheels and new tires asking 600.00
3/17/2014, 9:14 am by tulsadrags
» spring cruise
12/21/2013, 10:06 pm by Captain Chaos
» BMMC GT/CS Registry
11/26/2013, 11:00 pm by gcmustanglx