What mods = 11.5 1320 for GT500

[07Shelby500]

I'm curious as to what the mod list should look like in order to achieve a mid 11 second quarter mile run?

Discuss

[Shelby10']

Pulley, tune, Heat exchanger, upper control arm, Nice Drag Radials...and a little practice

[Shelby10']

There is a guy running 10s on the stock Eaton on another forum...here are his mods

'09 GT500 Coupe
Key Mods:
VMP 2.65 Upper, IW 10% O/D, L&M 66 TB, VMP Inlet, Posi Port, FRPP CAI, ARH 1-7/8 Long Tubes, Bassani 3", Revan H/E and Radiator, 3:73's, M/T 345 DR's, BMR K, Tuned at Sansone Ford by Kevin Hand of Wicked Motorsports.
SAE 616 rwhp 600 rwtq 93 octane
STD 638 rwhp 621 rwtq 93 octane

60' 1.743
1/8 7.067 @ 103.44
1/4 10.868 @ 127.86

Said he would be 10.6's if the DA was a little better


Here is another on a ported eaton:

10.54@129 1.49 60'
Factory Eaton and VMP big elbow with Posi port. Whipple monoblade. 2.6"/IW 10%. JLT. M&H Racemaster DR. Bogarts. Lots of suspension stuff. Old fart driver with slow reflexes. AARP card.


60' 1.495
330. 4.360
1/8. 6.745@102.52
1000' 8.818
1/4. 10.548@129.55

[fst06stg]

David, you better get a roll cage (cough Paul loweredf1 cough) cause you know youll only want to go faster.

[07Shelby500]

My goal is to be able to have an all around performer that can run repeatable mid 11's when it has strip duty.

My build plan consists of control arms (already did BMR lowers) upper adjustable arm with mount, relocation brackets, adjustable panard bar, lowering springs, C&L CAI, 2.59" stock looking pulley, idler, replacement 08 or newer damper, 373:1 gears, heat exchanger, aftermarket shifter. I think these mods will gain me what I'm looking for.

[07Shelby500]

Yeah Yancy I hear ya. Lol. I really don't want to cage it though. This is why I'm saying 11.5. I think that's probably quick enough to give most anything on the street a good run for their money.

[Shelby10']

My goal is to be able to have an all around performer that can run repeatable mid 11's when it has strip duty.

My build plan consists of control arms (already did BMR lowers) upper adjustable arm with mount, relocation brackets, adjustable panard bar, lowering springs, C&L CAI, 2.59" stock looking pulley, idler, replacement 08 or newer damper, 373:1 gears, heat exchanger, aftermarket shifter. I think these mods will gain me what I'm looking for.

Make sure you upgrade your radiator along with your Heat Exchanger....would benefit more. Looks to me you would be well on your way

[Shelby10']

Yeah Yancy I hear ya. Lol. I really don't want to cage it though. This is why I'm saying 11.5. I think that's probably quick enough to give most anything on the street a good run for their money.

I think you are there already

[07Shelby500]

Can't let those pesky Z06 guys get the better of me. Lol

[Shelby10']

Can't let those pesky Z06 guys get the better of me. Lol

There is nothing you can do...its a Z06...they are unstoppable!!!






No really...they are

[07Shelby500]

Nah, I'm sure I could shock a few. Lol

[fst06stg]

corvette owners huh? oh, you mean those old pop-bellied men that wear the leather jackets that they cant button up with corvette patches all over them and wrinkled chevy hats they just pulled out of the box? those guys?

[07Shelby500]

Those are the ones.

[Shelby10']

yes yes...those are definitely the ones

[jc101]

with just the heat exhanger and the thermostat it completely eliminated the heat soak problems. In 100 degree weather.

that was my plan heres my list of mods thus far.

C&L intake
VMP 2.59 pulley / idler
AFCO heat exchanger
Reische Performance 170 Degree thermostat
J&M upper adjustable, lower billet control arms and panhard rod
metco heavy duty upper mount/drive shaft safety loops F/R
DSS one piece aluminum drive shaft

sway bar relocation kit needed
race star wheels 15x10
325/50/15 mickey thompson ET street radial

[07Shelby500]

Have you run it yet? Looks like your doing nearly exactly what I plan to do.

[Shelby10']

Nice Mod list Jason!! Is there a real difference in the Afco heat exchanger and the Raven Racing?

[jc101]

I couldn't tell the difference my friend has the raven one. Him and I couldn't tell any difference.

[07Shelby500]

I was curious about which heat exchanger to look at as well. I guess if there is no noticeable difference then it will come down to price.

[jc101]

I got tired of reading this ones better crap so me and my friend decided i get on he got the other.

the afco saved a few bucks. you can get it with the dual fans to if you want.(I am running no fans and dont notice any heat soak after 3-4 WOT pulls in 90 to 100 degree weather.

[Shelby10']

I am down for saving money! Afco with fans it is

Thanks for the feedback!

[jc101]

no problem

[Leonard 95]

Upper/lower, 3.73, 2.6 pulley, tune, cai and set of drag radials! 7.4 at 100mph in the 1/8 which is easily 11.5 in the 1/4. Heck I only went 1.81 in 60ft so it could of been better.

[Shelby10']

Upper/lower, 3.73, 2.6 pulley, tune, cai and set of drag radials! 7.4 at 100mph in the 1/8 which is easily 11.5 in the 1/4. Heck I only went 1.81 in 60ft so it could of been better.

sooo why didnt you finish the 1/4 mile

I keed I keed

[Leonard 95]

Not my fault I promise lol!

[07Shelby500]

Yeah I figured those mods would do the trick. We need to go have a track day before they close up till spring. Take advantage of this fall air. I think mines got a bit more in her still. I'm not satisfied with a 12.7 stock. I want at least a 12.5.

[Shelby10']

Not my fault I promise lol!

I wont tell if you wont














...burnt the clutch up cough cough

[07Shelby500]

Haha. Made for some great entertainment in our year end wrap-up video last year. It was after all a Leonard Ass Production. Haha

[Sponsored content]